Abstract
The textile industry generates a large amount of waste, producing approximately 92 million tons of textile waste annually, much of which ends up in landfills. This alarming figure highlights the need for an urgent waste management strategy. Mechanical recycling has emerged and is being explored as an alternative to manage this waste, enabling the transformation of discarded textiles into recycled fibers for the production of new materials. In this study, a Life Cycle Assessment (LCA) was conducted for five different knitted fabrics, considering the origin of their cotton content: from virgin cotton to postindustrial and post-consumer recycled cotton fibers, to evaluate the environmental impact of each fabric. The analysis revealed that the spinning, dyeing, and finishing processes were the primary contributors across multiple environmental impact categories. Specifically, for the Water Scarcity Potential (WSP) indicator, these processes accounted for 96% of the total impact. In terms of raw material contributions to water scarcity, organic cotton fiber had the highest impact at 54%, followed by post-consumer recycled cotton at 24% and post-industrial recycled cotton at 22%. Variations in environmental contributions were also observed for the remaining impact categories. A key challenge in this study is the lack of a dedicated impact category in LCA that directly quantifies the environmental benefits of using recycled materials. Specifically, current LCA methodologies do not have a standardized metric to measure the impact reduction achieved by substituting virgin fibers with recycled ones, even though comparisons indicate reduced impacts.
Showing the abstract — retrieve the full paper via the Exa API.